Description
Model: PM 45 4G
Dual SIM 4G + IP
The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.
The PM45 4G is a versatile alarm communicator that reports on 4G, 3G and IP to the Central Station.
This communicator can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/3G in the event of a wired Ethernet failure. The communicator reports on 4G or 3G if there is no IP connected.
Key Features
- Remote “over-the-air” alarm panel programming using 4G/3G or IP path
- Dual SIM + IP alarm communicator
- Plug & Play solution
- Interfaces with any Contact ID alarm panel
- 3 input + 3 output, function control using Atlas and/or Pocket Secure
- Communicator automatically switches between 4G and 3G networks
- Low current draw, easily powered from alarm panel
Additional Features
- Small size – Fits inside alarm panel enclosure and suitable for ATM & M2M applications
- Secure VPN within Optus & Telstra networks – Dedicated for Permaconn events only
- AES128 encryption for alarm data – Secure transmissions over the public internet
- High speed RS232 Interface – Future development
- PM45-4G acquires an IP address automatically using the customers DHCP service – No IT headache
- Various diagnostic LEDs – Easy installation
- Activate, commission and diagnose using Atlas – Seamless installation process
- Three (3) dedicated paths of communication – Uptime in excess of 99.9%
- Internal watchdog reset function – No unnecessary service call-outs
- Monitors & reports dialler interface lead status – Panel dialler to Permaconn interface secure
- Compliant to AS2201.5:2008
- Outputs can be configured to arm/disarm alarm system, control gates and lights. ‘Pocket Secure’ smartphone app controls these functions.
Specification
Housing Material: ABS plastic – Green.
Dimensions: 110mm (h) x 25mm (d) x 80mm (w).
Weight: 120gm.
Operating Environment: 0°- 50°C @15% to 85% humidity (non-condensing).
Antenna: Triple band 3G & Triple band 4G.
Modem: Quectel EC21.
Power: 8–15V DC. Terminal (must power from appoved supply).
Power Consumption: Standby: 0.08A @13.8V DC, Transmitting: 0.19A @13.8V DC.
Communication Protocol: Ethernet (10/100BASE-T).
Network Protocol: DHCP or Static IP.
Serial Port: High Speed RS232 interface.
Auxiliary Input: 3 x 24Hr input – state change detected every second. EOL 3.3K.
Auxiliary Output: 3 x Open Collector output @ 50mA (max) Function control using Atlas web portal and/or ‘Pocket Secure’.
Static IP Network Configuration: Ethernet interface using ‘IpSetup’ program Atlas web portal using mobile connection.
Data Security: AES Encryption.
Supported Modulation: BELL-103, ITU-V21/V22/V22B.
Transmitting: EN 55022:2006/A1:2007, AS/CA S042.1-2011, AS/CA S042.4-2011 AS/NZS 60950.1-2011, AES2201.5:2008, EN 62311:2008, EN 301489-1 EN 301 489-24, EN 301 908-1, EN60950-1.
