Description

The Single Series Electromagnetic Locks operate with holding forces from 200kg to 450kg. Covering a range of applications the Z4 and Z8 Electromagnets are ideal for applications from standard doors through to high use commercial swing doors.
With fixing options including wood, aluminium and steel constructions, as well as glass door applications, the range caters to most electromagnetic needs.

Key Features

Fail-safe: unlocks when power is removed
Easy installation: suitable for both new and retrofit usage
High holding force: refer to the technical data overleaf
Self-alignment: armature plate pivots to accommodate door drop
Silent operation: no humming or buzzing
Dual voltage: site selectable 12 or 24 Vdc
Monitoring: Reed Switch monitoring on all models. Hall-Effect monitoring on Z4 and Z8 models.
Instantaneous release: smart electronics on the Z Series Electromagnets eliminate residual magnetism

Monitoring

Hall/Bond Monitoring
This indicates that the lock is powered and that the armature plate is in position and magnetically bonded (it monitors if the magnet is locked)

Reed switch monitoring
An integrated reed switch monitors the door position separately (it monitors the position of the door)

Applications

Aluminium doors
Glass doors
IT Storage rooms
Access control
Surface mount for inswing and outswing doors

Standards and Compliance

Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)
CE Approved
C-Tick Certified

Specifications

Z4 Magnet
Nominal Holding Force 200kg*
Dimensions (L)238 x (H)48 x (D)27 mm
Voltage 12Vdc/ 24Vdc ±10%
Current 450mA @ (12Vdc) 225mA @ (24Vdc)
Monitoring Hall-Effect/Bond sensing & Reed Switch
Operating Temperature -10 to 55 Degrees
Operating Humidity 0 – 95%

Z8 Magnet
Nominal Holding Force 450Kg*
Dimensions (L)266 x (H)72 x (D)40 mm
Voltage 12Vdc/ 24Vdc ±10%
Current 512mA @ (12Vdc) 256mA @ (24Vdc)
Monitoring Hall-Effect/Bond sensing & Reed Switch
Operating Temperature -10 to 55 Degrees
Operating Humidity 0 – 95%

Holding force is measured directly between armature and magnet, holding force on the door may vary depending on the leverage created.
*Stated Holding Force represents a reliable indicative measure of expected performance but it may vary depending on installation and environmental factors.

Specification Statement
The Single Series Electromagnetic Lock should be constructed in an aluminium case with heavy duty electromagnet. The range only operates in fail safe mode and relies on a secondary lock or battery backup system. In some cases the magnet armature plate pivots to accommodate door drop. The lock needs to be equipped with “smart electronics” that have zero residual magnetism, (instantaneous release). This is crucial for correct operation.

Dimensions